The most common problems you’ll encounter with vinyl sills are discoloration, rust, or water damage.
This is why it’s important to thoroughly clean them to avoid further damage.
We’ve already covered how to remove vinyl siders and carpets, so here are five tips to help you keep your vinyl sider and carpet cleaner free of scratches and discolored areas.1.
Use a vacuum to remove any dust or dirt from your vinyl.
The easiest way to remove dirt is to apply a heavy duty vacuum to the surface of your vinyl surface, then hold the vacuum down for several seconds.
This will remove any remaining dust.
The dirt will then be absorbed into the surface and cleaned off.2.
Rinse the vinyl surface with a solution of a mild detergent and water.
You can also use a sponge or a cotton swab to wipe off any dust and debris that might remain.3.
Use your favorite vacuum cleaner to clean the vinyl sides and carpings.
There are many vacuum cleaners that can be used for this job, but a couple of best-selling brands will do the job for you.
Use them carefully to avoid contaminating your vinyl and carpet with the residue from a previous cleaning.4.
Use an electric vacuum cleaner.
These are more efficient than a vacuum, and they can remove dust and residue more effectively than a dryer.
If you don’t have a vacuum and can’t afford one, the best option is to buy one online or from a local auto parts store.
The electric vacuum will remove dust from the vinyl and the carpet surface.5.
Use the dryer or air dryer to gently clean your vinyl floor and carpet surfaces.
These products are more effective at removing the moisture and dirt than a wet dryer, but they will also create more rust if you let it sit for too long.6.
Check your vinyl for signs of rust.
If the vinyl has rust, it may be an indication that it’s time to remove it.
The best way to determine if the vinyl is rust free is to run a light, round-tip vacuum over the surface.
You should see the discolor disappear and the metal particles disappear, then you’ll know that the vinyl will be ready for removal.7.
Use air dryers to gently dry the vinyl floor.
Dryers can help you get the dust off quickly, but don’t try to dry the entire vinyl surface.
Using a dry, gentle blow helps to dry and remove dirt and dust.8.
Use cloth towels to dry your vinyl surfaces.
The most popular cloth towels are soft cotton or nylon.
You may also want to try the softer versions that come in the dry or air drying aisle.
Dry your vinyl by covering the area with a clean, dry cloth towel.
The towels will help you to remove all the dust and other contaminants that may have accumulated.9.
Use alcohol to clean your car carpet and vinyl sids.
The alcohol you use to clean vinyl is a solvent and can be a good choice if you don: Have a vinyl sizer in your garage, for example.